Reflectra delivers a true liquid chrome that self-levels into a glassy mirror finish on smooth, non-absorbent surfaces such as plastic, glass, metal, varnished wood, rubber, and foam.
Powered by an alcohol-based pigment and a valve-fed flow system, the ink is delivered to the nib with every press, ensuring steady, leak-free performance without stops mid-stroke.
The finish is a permanent, scratch-proof, UV-resistant, weather-proof coat that bonds to smooth substrates and stays bright under sunlight, resisting fingerprints and chipping on finished builds like helmets, sneakers, or wheel emblems.
The secret to the real chrome look is the suspension of ultra-fine chrome pigments in an alcohol carrier, which self-levels within 2 to 3 seconds into a flat, mirror-bright layer on smooth surfaces, rather than drying patchily like cheaper metallic paints.
An internal flow valve keeps pigment moving smoothly at the tip, preventing the clumps and inconsistent finishes common with other liquid chrome markers after storage.
Model builders and sneaker enthusiasts alike rely on Reflectra for results that resemble dipped chrome rather than mere metallic paint, with examples including Gundam armor, sneaker midsoles, and wheel rims that look like real chrome without requiring a clear coat.
Three nib sizes cover a range of tasks: 0.7mm for fine lettering and panel lines, 1.0mm for outlines and trims, and 3.0mm for broader fills. The ink is also compatible with airbrush application, allowing direct refilling from the marker to coat helmets, domes, and other large curved surfaces.
To apply it correctly: 1) pick the nib that suits the job, 0.7mm for detail, 1.0mm for outlines, 3.0mm for fills. 2) Shake vigorously for 20–30 seconds to re-suspend the pigments. 3) Press the nib to a clean surface to pump the flow, then glide; the chrome self-levels in 2–3 seconds into a mirror finish. For best results, allow at least 1 hour to set, or 12 hours for a full cure before handling.
Surface compatibility spans plastic, glass, metal, varnished wood, foam, and other smooth, non-absorbent substrates, with the smoothest results on surfaces that are least porous. For finishes that are not fully non-absorbent (like raw wood or paper), the appearance leans metallic rather than a full mirror.
Dimensions and options: the marker runs 5.6 inches long, with a diameter of 0.63 inches. Finishes available include Silver Chrome, Gold Chrome, and Copper Chrome. Each package contains 1 Reflectra Liquid Mirror Marker, and the ink is suitable for airbrush use—refill the cup directly from the marker for spraying on domes and large curves.
Will it truly look like a mirror or just shiny metal? On glass, hard plastic, and metal, it self-levels into a genuine mirror; on porous substrates you’ll see a metallic finish rather than a reflective surface. Handling after curing is durable and fingerprint resistant; allow the full 12 hours for a complete cure before heavy use. If the result doesn’t meet the mirror standard within 30 days, you can return for a full refund.
