Get razor-sharp cutting power in seconds by clamping SharpEdgePro to your chainsaw bar and cranking to restore a 30° edge on every tooth.
The jig locks each tooth at a fixed 30° with a built‑in pawl, delivering uniform teeth from heel to tip with no measuring, no drift, and no chain removal.
Mounting is fast: three thumbscrews clamp the jig to the bar in under a minute, while a fourth fine‑adjustment knob sets burr depth so you remove only what’s needed.
It fits 4"–22" bars on most saws thanks to a universal clamp, covering gas, electric, and battery models; compatible with Stihl, Husqvarna, Echo, Ryobi, and Greenworks.
The system relies on a fixed 30° guide sleeve and a carbide burr. Turn the hand crank for three to five rotations per tooth, then advance the chain and repeat. The chain stays on the bar, so there’s no stand, no power tool, and no special setup. A full chain typically takes about 10 minutes the first time and less on subsequent sharpenings.
Three steps to a razor-sharp chain: clamp the jig on, drop the pawl on the first tooth, then turn the crank. Slide the chain forward to the next tooth and repeat. Expect roughly 10 minutes for a full chain the first time; faster after you’ve done it once.
In the box: SharpEdgePro jig, five grinding burrs, crank arm, spanner wrench, and two lock nuts.
| SharpEdgePro | Hand Files | Bench Grinders |
|---|---|---|
| Pawl-locked 30° on every tooth | ❌ Freehand — angle drifts every stroke | ❌ Requires removing the chain |
| Mounts on the bar in under 60 seconds | ❌ Needs a vise or stump-mounted clamp | ❌ Bench-mounted, not portable |
| Aluminum alloy body, takes years of use | ❌ Files dull fast, replace often | ❌ Bulky and overkill for occasional use |
Material: Aluminum alloy body, hardened steel hardware. Sharpening angle: Fixed 30°. Compatibility: Fits 4"–22" bars across gas, electric, and battery saws. Color options: Gold, Blue. Dimensions: 2.83" × 2.1" × 1.1" (7.2 × 5.4 × 2.8 cm). In the box: 1 × SharpEdgePro jig, 5 × grinding burrs, 1 × crank arm, 1 × spanner wrench, 2 × lock nuts.