One tool strips, cuts, twists conductors, and verifies a circuit is dead—so you never descend a ladder or juggle multiple devices on a crowded job site.
VoltEdge is the electrician’s all‑in‑one for 1.0 to 4.0 mm² copper cables, handling both stranded and solid copper. It uses five gauge notches—1.0, 1.5, 2.0, 2.5, and 4.0 mm²—to strip jackets cleanly with no nicked conductors. The head pairs a split‑hole with a winding hole to grip the jacket, twist conductors, and separate the sheath in one motion, while a long needle‑nose tip reaches tight box backs.
Power and safety are built in: the handle houses a non‑contact voltage detector with a green LED for dead and a red LED plus buzzer for live, so you know when to pause and isolate the circuit. The stripping notches and the splitting jaw use SK5 high‑carbon steel, the same material used in Japanese chisels, which keeps edges sharp through a renovation. The tool body is 3CR13 stainless steel and measures 8 inches overall.
Three actions become one streamlined workflow: strip, twist, and test without leaving the wire. A built‑in LED and audible alert prevents you from working live and keeps your hand away from the line. The tool is designed to replace separate strippers, cutters, and voltage testers on‑site, reducing belt clutter and improving workflow.
- Drop the wire into the matching gauge notch (1.0, 1.5, 2.0, 2.5, or 4.0 mm²) and squeeze—the SK5 blade strips insulation without touching the conductor.
- Use the long‑nose tip to grab and twist conductors, then move to the winding or split hole for a clean pair twist and sheath separation.
- Press the contact pad against the insulation; green LED means dead, red LED plus buzzer means live and you should kill the breaker before continuing.
Specifications at a glance: stripping notches cover 1.0, 1.5, 2.0, 2.5, and 4.0 mm² (roughly 17–11 AWG); SK5 high‑carbon steel for the notches and splitting jaw; body built from 3CR13 stainless; 8 inches in overall length; non‑contact voltage detector with LED indicator (green for safe, red plus audible alert) built into the handle.
Included with VoltEdge is a single tool ready to work, with a safety lock to keep the jaws closed when stored in a pouch or drawer. If the tool does not replace at least two belt tools within 30 days, or if a strip notch dulls before your first major project is finished, you can return it for a full refund with no restocking fee.